Show Ip As-Path Access-List - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-84 show ip as-path access-list

show ip as-path access-list [ACCESS-LIST-NAME]
Syntax Description
ACCESS-LIST-NAME
Default
Command Mode
Usage Guideline
Example
Switch# show ip as-path access-list
BGP AS Path Access List: a1
permit
deny
Total Filter Entries: 2
BGP AS Path Access List: a2
permit
deny
Total Filter Entries: 2
BGP AS Path Access List: a3
permit
Total Filter Entries: 1
Total AS Path Access List Number: 3
Switch#
CLI Reference Guide
To display configured as-path access-lists, use this command in user or privileged
mode.
(Optional) Specifies the access list to be displayed. The length is up to 16 characters.
None
Privileged mode.
This command can be used without any arguments or keywords. If no arguments are
specified, this command will display all as-path access-lists. However, the as-path
access-list name is specified when entering the show ip as-path access-list
command. This option can be useful for filtering the output of this command and
verifying a single named as-path access-list.
This example shows how to display the content of IP AS path access-list:
^300$
^200$
3*0$
20
1
show ip as-path access-list Field Description:
show ip as-path access-list
132