Show Ip Pim - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

12-19 show ip pim

show ip pim
Syntax
Description
Default
Command Mode
Usage Guideline
Example
Switch#show ip pim
Register Suppression Time
Register Keepalive Time
C-RP Wildcard Prefix Count
SPT Threshold
RP Address
1.1.1.1, group-list: static-rp-acl
RP Candidate
ip1, group-list: candidate-rp
System, group-list: crp-system
SSM Group : ssm-acl
Old Register Checksum to RP Address
-----------------------------------
172.18.1.2
Field
Register Keepalive Time
Register Suppression Time
SPT Threshold
C-RP Wildcard Prefix Count Specify the value to be set about Prefix Count value of the wildcard address
CLI Reference Guide
Use this command to display PIM global information.
None.
None.
User mode or Privileged mode.
Use this command to display global information of PIM.
The following example shows global information of PIM.
: 100
: 185
: 1
Description
Value in seconds. To configure this value, use command ip pim rp-
register-kat.
Value in seconds. To configure this value, use command ip pim register-
suppression.
Specify whether the switch forwarding in SPT, use command ip pim
spt-threshold to change the value.
(224.0.0.0/24) in PIM C-RP-Adv message. To modify the setting, use
command ip pim rp-candidate
: 0
show ip pim
413