D-Link xStack DGS-3620 Series Reference Manual page 240

DGS-3620 m/ mSW Rls. 1.02.000
6-3 permit
permit NETWORK-ADDRESS
no permit NETWORK-ADDRESS
Syntax Description
NETWORK-
ADDRESS
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# ip standard access-list Summer-Movie
Switch(config-ip-acl)# permit 120.2.0.0/16
Switch(config-ip-acl)# permit 125.1.2.2/20
Switch(config-ip-acl)# exit
Switch(config)#
CLI Reference Guide
Use this command to set the permit rules of standard IP access list. Use the no
form of this command to remove the permit rules.
Specifies a specific network address.
None.
Access list configuration mode.
One or multiple permit rules can be added to the list.
The maximum number of rules in one standard IP access list is 16.
Users can verify the settings by entering the show ip standard access-list command.
To configure permit rules for a standard IP access list:
permit
230