Debug Ip Ospf Redistribution - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

11-42 debug ip ospf redistribution

debug ip ospf redistribution
no debug ip ospf redistribution
Syntax
Description
Default
Command Mode
Usage Guideline
Example
Switch# debug ip ospf redistribution
Switch#
Import AS external route from src 5 net 192.1.1.1 mask 255.255.255.0 type 2
cost 50 fwd 10.1.1.100 tic 500
CLI Reference Guide
Use this command to turn on the OSPF redistribution debug switch. Use the no
form of the command to turn off the OSPF redistribution debug switch.
None.
By default the OSPF redistribution switch is turned off.
Privileged mode.
Use this command to turn on or turn off the OSPF redistribution debug switch.
When one route of another protocol is redistributed into OSPF or not
redistributed into OSPF any more, the debug information will be print if the OSPF
debug function is turned on.
Use the command debug ip ospf to turn off the OSPF debug function.
The following example turns on the OSPF redistribution debug switch:
debug ip ospf redistribution
377