Match Route-Type - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

14-10 match route-type

match route-type {internal| external| type-1 | type-2}
no match route-type
Syntax Description
internal
external
type-1
type-2
Default
Command Mode
Usage Guideline
Examples
Switch# configure terminal
Switch(config)# route-map rmap1 permit 10
Switch(config-route-map)# match route-type internal
Switch(config-route-map)#
CLI Reference Guide
Use this command to add a match command to match the type of routes. Use the
no form of this command to delete the match command with type of routes.
Intra-area and inter-area routes of Open Shortest Path First (OSPF).
Autonomous system external route of OSPF, including type-1 and type-2
external route.
Type-1 external route of OSPF.
Type-2 external route of OSPF.
None
Route map configuration mode
All types of routes, internal, external, type-1 and type-2, are only for OSPF.
You can verify your settings by entering the show route-map command.
To add a match command to match the metric of routes:
match route-type
450