Show Ip Mroute - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

7-3 show ip mroute

show ip mroute [{[GROUP-ADDRESS [SOURCE-ADDRESS] | dense | sparse | dvmrp |
summary] | static }]
Syntax Description
GROUP-ADDRESS
SOURCE-ADDRESS Multicast source IP address.
dense
sparse
dvmrp
summary
static
Default
Command Mode
Usage Guideline
Example
Switch# show ip mroute summary
IP Multicast Routing Table: 2 entries
Flags: D – Dense, S – Sparse, V – DVMRP
Timers: Uptime/Expires
(10.10.1.52, 224.0.1.3), vlan1, 00:01:32/00:03:20, Flags: D
(20.1.1.1, 228.10.2.1), vlan10, 00:05:10/00:03:11, Flags: S
CLI Reference Guide
Use this command to display IP multicast routing information.
Multicast group IP address.
Display PIM-DM multicast routing table.
Display PIM-SM multicast routing table.
Display DVMRP multicast routing table.
Display a one-line, abbreviated summary of each entry in the IP multicast routing
table.
Display the multicast static routes
None.
User mode or Privileged mode
This command is used to display the multicast routing entries learned on the
switch or the multicast static routes created on the switch. You can specify the
parameter to display the information that you concerning. If no parameter is
specified, all IP multicast routing entries learned on the switch will be displayed.
The following example displays multicast route brief information.
show ip mroute
236