Set As-Path Prepend - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

14-11 set as-path prepend

set as-path prepend ASPATH-LIST
no set as-path prepend
Syntax Description
ASPATH-LIST
Default
Command Mode
Usage Guideline
Examples
Switch# configure terminal
Switch(config)# route-map mapaspath permit 10
Switch(config-route-map)# set as-path prepend 1,10,100,200
Switch(config-route-map)#
CLI Reference Guide
Use this command to add a set command to modify an autonomous system path
of BGP routes. Use the no form of this command to delete this set command.
Specifies the path list to be appended before the autonomous system path of the
route. It could be an AS number or a list of AS numbers separated by comma.
None.
Route map configuration mode.
Use this command to change the length of the autonomous system path of BGP
route. This can affect the best path selection.
You can verify your settings by entering the show route-map command.
To add a set command to append an autonomous system path list to BGP
routes:
set as-path prepend
451