Show Ip Bgp Summary - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-107 show ip bgp summary

show ip bgp summary [{vrf VRF-NAME | vpnv4}]
Syntax Description
vrf VRF-NAME
vpnv4
Default
Command Mode
Examples
Switch# show ip bgp summary
BGP Router Identifier
Local AS Number
BGP AS Path Entries
BGP Community Entries
Neighbor
------------
10.90.90.100
Total Number of Neighbors: 1
Field
BGP Router Identifier
Local AS Number
BGP AS Path Entries
BGP Community Entries
Neighbor
Ver
AS
MsgRcvd
MsgSent
Up/Down
CLI Reference Guide
This command is used to display the state of all BGP neighbors connection, also
includes route id, local AS number and so on.
(Optional) Specifies a VRF name. The length of VRF-NAME is 12 characters.
(Optional) Displays the summary information of VPNv4 address family.
None .
Privileged mode.
This example is used to display the BGP summary information:
Ver AS
--- --- -------
4 100
Description
The router identifier of the local BGP router.
The Autonomous system number of local bgp.
AS path access-list number.
The entries of bgp community, including standard community and expand
community.
BGP neighbor which is created by command of neighbor <IP-ADDRESS
> remote-as <AS-NUMBER>.
BGP protocol version. And now, value is 4.
The peer's Autonomous system number.
The number of message which receives form this neighbor.
The number of message which be sent to this neighbor.
The length of time that the BGP session has been in the Established
state, or the current status if not in the Established state.
: 10.90.90.10
: 10
: 0
: 0
MsgRcvd MsgSent
-------
10 8
show ip bgp summary
Up/Down State/PfxRcd
------- ------------
00:03:18 10
191