Show Ip Bgp Aggregate - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-86 show ip bgp aggregate

show ip bgp aggregate [vrf VRF-NAME] [NETWORK-ADDRESS]
Syntax Description
vrf VRF-NAME
NETWORK-ADDRESS (Optional) Specify the network address and the sub-network mask, for example:
Default
Command Mode
Usage Guideline
Examples
Switch#show ip bgp aggregate 10.0.0.0/8
Network Address
------------------
100.0.0.0/8
200.0.0.0/10
Total Aggregate Address Number:
Field
Network Address
Options
Total Aggregate Address
Number
CLI Reference Guide
To display aggregate entry in BGP (Border Gateway Protocol) database, use this
command in user or privileged mode.
(Optional) Specifies a VRF name. The length of the VRF-NAME is 12 characters.
120.25.0.0/16
None
Privileged mode.
This command is used to display aggregate entries created.
This example output from the show ip bgp aggregate command in privileged mode.
Options
-------------------
-
summary-only
show ip bgp aggregate Field Description
Description
IP prefix with its mask length of the entry.
May be as-set or summary-only.
The aggregate network number.
2
show ip bgp aggregate
138