Show Mpls Ldp Interface - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

10-32 show mpls ldp interface

show mpls ldp interface [ INTERFACE-ID ]
Syntax Description
INTERFACE-ID
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use this command to show the LDP interface information.
(Optional) Specifies interface that will display. If no interface ID is specified the
command will display information for all interfaces.
N/A.
EXEC mode.
This command is used to show LDP information on the interface.
Interface: IP interface name.
Admin State: The current LDP configure state of the interface.
Oper State: The current operational state of the interface.
Targeted Hello Accept: targeted hello message is acceptable or no.
Hello Interval: link hello interval.
Hello Hold Time: link hello hold-time.
Distribution Method: Downstream-Unsolicited (DU) or Downstream-on-
Demand (DoD).
show mpls ldp interface
301