Bgp Bestpath Compare-Confed-Aspath - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-8 bgp bestpath compare-confed-aspath

bgp bestpath compare-confed-aspath
no bgp bestpath compare-confed-aspath
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# router bgp 100
Switch(config-router)# bgp bestpath compare-confed-aspath
E
CLI Reference Guide
To configure a BGP routing process to compare the confederation AS path
length of the routes received, use this command in router configuration mode. To
return the BGP routing process to the default operation, use the no form of this
command.
None
This function is disabled by default.
Router configuration mode.
If enabled, the BGP process will compare the confederation AS path length of the
routes received. The shorter the confederation AS path length, the better the
route is.
You can verify your settings by entering show ip bgp parameters command.
This example shows how to enable BGP process to compare the AS path which
contains some confederation as numbers:
bgp bestpath compare-confed-aspath
25