DGS-3620 m/ mSW Rls. 1.02.000
5-1 interface loopback
interface loopback <int>
no interface loopback <int>
Syntax Description
int
Default
Command Mode
Usage Guideline
Example
Switch(config)# interface loopback 2
Switch(config-if)# ip address 10.1.1.1 255.0.0.0
CLI Reference Guide
Use this command to create a loopback interface and enter the interface configuration
mode. Use the no form of this command to delete a loopback interface
The loopback interface number.
None.
Global configuration mode
Users can verify the settings by entering the show interface loopback command.
Create a loopback interface 2 and configure IP 10.1.1.1/8 to it.
interface loopback
224