How To Select The Mapping Of The Control Unit - MV Agusta Brutale 800 User Manual

4.4.8. How to select the mapping of the control unit

On the Brutale 800 model is it possible to select differ-
ent control unit mappings which allow to obtain variable
power and performance characteristics based on the
type of vehicle use.
NOTE
The mapping selection may be performed
even during the use of the vehicle.
The mapping of the control unit can be selected by
pressing the start button when the engine is switched
on; this way the mapping switches to the following setting
value. The corresponding mapping characteristics are
listed in the following table.
Mapping
N
Mode
Normal
OPERATION
R S C
Rain Sport
Customised
- 57 -
4
4