Analyse the condition of the rear brake system and its
components.
Proceed with the reassembly in the reverse order of
removal.
Tighten the pin to the prescribed torque pressure.
Rear brake caliper pin torque pressure: 15 ÷
20 N•m
H
SUBSTITUTION AND BLEEDING OF THE REAR
BRAKE FLUID
The operation described herewith must be
carried out with the engine cold: the position
of the brake fluid tank could cause grave
burns.
To carry out this operation it is necessary to remove
the passenger seat, the rider seat and the fuel tank,
to accede to the brake fluid tank as described in chap-
ter C "Bodywork".
Brakes
15÷20 N•m
- 30 -