Table of Contents
Advertisement
Operating Menu Screens
Adjustment buttons (
Operating the Menu Screens
1
Press the MENU button.
The Menu screen is displayed.
IMAGE
Brightness
Contrast
Color Temp.
Factory Default
Next Page
: Select
ENTER : Next
Example: When RGB is selected for the input
source
Note
• The operation bar is displayed at the bottom of
the screen.
2
Select the menu item you wish
to adjust with the adjustment
buttons (
control unit or projector.
The selected menu screen is displayed.
The menu screen switches as shown below each
time the buttons are pressed.
IMAGE (P.24)
INSTALLATION (P.28)
22
,
,
,
)
0
0
0
Operation bar
,
) on the remote
↔
POSITION (P.26)
↔
DISPLAY (P.27)
POWER
AUTO
MUTE
MODE
ENTER
ENTER button
MENU
MENU button
STATUS
ZOOM-PAN
VOLUME
KEYSTONE
CANCEL
IMAGE
Brightness
Contrast
Color Temp.
Factory Default
Next Page
: Select
Example: Select the IMAGE menu.
3
Press the ENTER button.
The screen for selecting the item you wish to
adjust is displayed.
Note
• The same operation can be performed by
pressing the
4
Select the item you wish to
adjust with the adjustment
buttons (
The green button on the left of the selected item
lights up.
IMAGE
Brightness
Contrast
Color Temp.
Factory Default
Next Page
: Select
Example : Select Brightness.
0
0
0
ENTER : Next
adjustment button.
,
).
0
0
0
ENTER : Next
Advertisement
Table of Contents
