Network Group Alias - Motorola WiNG 5.6 Reference Manual

5 - 10 WiNG 5.6 Access Point System Reference Guide

5.1.3.2 Network Group Alias

RF Domain Configuration
A network group alias is a set of configurations that consist of host and network configurations. Network configurations are
complete networks in the form 192.168.10.0/24 or IP address range in the form 192.168.10.10-192.168.10.20. Host
configuration is in the form of single IP address, 192.168.10.23.
A network group alias can contain multiple definitions for host, network, and IP address range. A maximum of eight (8) host
entries, eight (8) network entries and eight (8) IP addresses range entries can be configured inside a network group alias. A
maximum of 32 network group alias entries can be created.
A network group alias is used in IP firewall rules to substitute hosts, subnets and IP address ranges:
To edit or delete a network alias configuration:
1. Select Configuration
2. Select Devices.
3. Select RF Domain.
4. Select the Network Group Alias
Name
Host
Network
tab from the Web user interface.
tab.
Figure 5-5 RF Domain - Network Group Alias screen
Displays the administrator assigned name of the network group alias.
Displays all host aliases configured in this network group alias. Displays a blank column if no
host alias is defined.
Displays all network aliases configured in this network group alias. Displays a blank column if
no network alias is defined.