L2Tpv3 Tunnels - Motorola WiNG 5.6 Reference Manual

OSPF ignore
state monitor
timeout
OSPF max ignore
state count
OSPF max routes
OSPF routes
received
5. Select the Refresh

13.3.15 L2TPv3 Tunnels

Access Point Statistics
Access points use L2TP V3 to create tunnels for transporting layer 2 frames. L2TP V3 enables an access point to create tunnels
for transporting Ethernet frames to and from bridge VLANs and physical ports. L2TP V3 tunnels can be defined between WING
devices and other devices supporting the L2TP V3 protocol.
To review a selected access point's L2TPv3 statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Select L2TPv3.
Displays the timeout that, when exceeded, prohibits the access point from detecting changes to
the OSPF link state.
Displays whether an OSPF state timeout is being ignored and not utilized in the transmission of
state update requests amongst neighbors within the OSPF topology.
States the maximum number of routes negotiated amongst neighbors within the OSPF topology.
Lists the routes received and negotiated amongst neighbors within the OSPF topology.
button to update the statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Figure 13-60 Access Point - L2TPv3 screen
Statistics 13 - 95