Overriding A Management Configuration - Motorola WiNG 5.6 Reference Manual

5 - 356 WiNG 5.6 Access Point System Reference Guide
Either select an existing captive portal policy, use the default captive portal policy or select the
captive portal configuration that can be applied to a profile. For more information, see
on page 9-2.
6. Refer to the DHCP Server Policy
DHCP Server Policy is a configuration that defines the DHCP pool, global settings and DHCP class information for IPv4 DHCP
servers.
7. Refer to the IPv6 DHCP Server Policy
IPv6 DHCP Server Policy is a configuration that defines the DHCP pool, global settings and DHCP class information for IPv6
DHCP servers.
8. Refer to the Bonjour Gateway
Bonjour is Apple's implementation of zero-configuration networking (Zeroconf). Zeroconf is a group of technologies that
include service discovery, address assignment and hostname resolution. Bonjour locates devices such as printers, other
computers and services that these computers offer over a local network.
Bonjour Forwarding Policy enables discovery of services on VLANs which are not visible to the device running the Bonjour
Gateway. Bonjour forwarding enables forwarding of Bonjour advertisements across VLANs to enable the Bonjour Gateway
device to build a list of services and the VLANs where these services are available.
9. Select OK to save the changes or overrides made to the profile's services configuration. Select
saved configuration.

5.4.5.9 Overriding a Management Configuration

Device Overrides
There are mechanisms to allow/deny management access to the network for separate interfaces and protocols (HTTP, HTTPS,
Telnet, SSH or SNMP). These management access configurations can be applied strategically to profiles as resource
permissions dictate for the profile. Additionally, overrides can be applied to customize a device's management configuration,
if deployment requirements change and a devices configuration must be modified from its original device profile configuration.
Additionally, an administrator can define a profile with unique configuration file and device firmware upgrade support.
To define or override a profile's management configuration:
1. Select Devices
2. Select Device Overrides
3. Select a target device from the device browser in the lower, left-hand, side of the UI.
4. Select Management.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's
Device Overrides
from the device.
field to select or set a DHCP server policy.
field to select or set an IPv6 DHCP server policy.
field to select or set a Bonjour Gateway
from the Configuration tab.
from the Device menu to expand it into sub menu options.
field and select
Forwarding
Clear Overrides. This will remove all overrides
Create link to create a new
Configuring Captive Portal Policies
Policy.
Reset to revert to the last