Graph - Motorola WiNG 5.6 Reference Manual

13 - 154 WiNG 5.6 Access Point System Reference Guide
Channel
Band
Time
4. Select Refresh

13.4.6 Graph

Wireless Client Statistics
Use the client Graph
negatively impacting performance. Up to three selected performance variables can be charted at one time. The graph uses a
Y-axis and a X-axis to associate selected parameters with their performance measure.
To view a graph of this client's statistics:
1. Select the Statistics
2. Select System
connected client.
3. Select Graph.
4. Use the Parameters
5. Use the Polling Interval
5 minutes, 20 minutes or 1 hour. 30 seconds is the default value.
Select an available point in the graph to list the selected performance parameter, and display that parameter's value and a
time stamp of when it occurred.
Lists the channel shared by both the access point and client for interoperation, and to avoid
congestion with adjacent channel traffic.
Lists the 2.4 or 5GHz radio band this clients and its connect access point are using for transmit
and receive operations.
Lists the historical connection time between each listed access point and this client.
to update the screen to it's latest values.
to assess a connected client's radio performance and diagnose performance issues that may be
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain, an access point then a
drop down menu to define from 1- 3 variables assessing client signal noise, transmit or receive values.
drop-down menu to define the interval the chart is updated. Options include 30 seconds, 1 minute,
Figure 13-103 Wireless Client - Graph