Pppoe - Motorola WiNG 5.6 Reference Manual

The Access Point
Tag Reports
Refresh

13.3.13 PPPoE

Access Point Statistics
The PPPoE statistics screen displays stats derived from the AP's access to high-speed data and broadband networks. PPPoE
uses standard encryption, authentication, and compression methods as specified by the PPPoE protocol. PPPoE enables access
points to establish a point-to-point connection to an ISP over existing Ethernet interface.
To review a selected access point's PPPoE statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Select PPPoE.
The Configuration Information
Shutdown
Service
DSL Modem Network
(VLAN)
RTLS screen displays the following for Ekahau tags:
Displays the number of tag reports received from locationing equipped radio devices
supporting RTLS.
Select the Refresh button to update the screen's statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Figure 13-51 Access Point - PPPoE screen
field screen displays the following:
Displays whether a high speed client mode point-to-point connection has been enabled using
the PPPoE protocol.
Lists the 128 character maximum PPPoE client service name provided by the service provider.
Displays the PPPoE VLAN (client local network) connected to the DSL modem. This is the local
network connected to DSL modem.
Statistics 13 - 83