Motorola WiNG 5.6 Reference Manual page 535

Access point
Table of Contents

Advertisement

Reserved for Roam
17. Set the following
Low (Background) Access
Enable Background
Maximum Airtime
Maximum Wireless
Clients
Maximum Roamed
Wireless Clients
Reserved for Roam
18. Select the
Multimedia Optimization
configuration for the radio's QoS policy.
Set the roam utilization (in the form of a percentage of the radio's bandwidth) allotted to
admission control for video supported clients who have roamed to a different managed
radio. The available percentage range is from 0 - 150%, with 150% accounting for over-
subscription. The default value is 10%.
admission control settings for the radio QoS policy:
Select this option to enable admission control for lower priority traffic. Only low traffic
admission control is enabled, not any of the other access categories (each access category
must be separately enabled and configured).
Set the maximum airtime (in the form of a percentage of the radio's bandwidth) allotted
to admission control for low client traffic. The available percentage range is from
0 - 150%, with 150% being available to account for over-subscription. Best effort traffic
only needs a short radio airtime to process, so set an intermediate airtime value if the
radio QoS policy is reserved to support background data. The default value is 75%.
Set the number of low priority wireless clients allowed to exist (and consume bandwidth)
within the radio's QoS policy. Select from 0 - 256 clients. The default value is 100.
Set the number of low priority supported wireless clients allowed to roam to a different
access point radio. Select from 0-256 clients. The default value is 10.
Set the roam utilization (in the form of a percentage of the radio's bandwidth) allotted to
admission control for clients who have roamed to a different access point radio. The
available percentage range is from 0 - 150%, with 150% available to account for over-
subscription. The default value is 10%.
tab to configure advanced multimedia QoS configuration and Smart Aggregation
Wireless Configuration 6 - 69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents