Motorola WiNG 5.6 Reference Manual page 577

The L2TP V3 screen lists the policy configurations defined thus far.
2. Refer to the following to discern whether a new L2TP V3 policy requires creation or modification:
Name
Cookie size
Hello Interval
Reconnect Attempts
Reconnect Interval
Retry Count
Retry Time Out
Rx Window Size
Tx Window Size
Failover Delay
Figure 7-5 L2TP V3 Policy screen
Lists the 31 character maximum name assigned to each listed L2TP V3 policy upon
creation.
Displays the size of each policy's cookie field within each L2TP V3 data packet. L2TP V3
data packets contain a session cookie which identifies the session (pseudowire)
corresponding to it. If using the CLI, cookie size can't be configured per session, and are
the same size for all sessions with in a tunnel.
Displays each policy's interval between L2TP V3 hello keep alive messages exchanged
within the L2TP V3 control connection.
Lists each policy's maximum number of reconnection attempts to reestablish a tunnel
between peers.
Displays the duration set for each listed policy between two successive reconnection
attempts.
Lists the number of retransmission attempts set for each listed policy before a target
tunnel peer is defined as not reachable.
Lists the interval the interval (in seconds) set for each listed policy before the
retransmission of a L2TP V3 signaling message.
Displays the number of packets that can be received without sending an
acknowledgement.
Displays the number of packets that can be transmitted without receiving an
acknowledgement.
Displays the time to wait before tunnel re-establishment.
Network Configuration 7 - 9