Motorola WiNG 5.6 Reference Manual page 380

5 - 294 WiNG 5.6 Access Point System Reference Guide
21. Review existing
Name
Type
Description
Admin Status
VLAN
IP Address
22. Select the Add
virtual interface configuration.
Figure 5-190 Device Overrides - Network - OSPF Interface Settings screen
Interface Settings using:
Displays the name defined for the interface configuration.
Displays the type of interface.
Lists each interface's 32 character maximum description.
Displays whether Admin Status privileges have been enabled or disabled for the OSPF
route's virtual interface connection.
Lists the VLAN IDs set for each listed OSPF route virtual interface.
Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero
config and DHCP can be used to generate route addresses, or a primary and secondary
address can be manually provided.
button to define a new set of virtual interface basic settings, or Edit to update the settings of an existing