Motorola WiNG 5.6 Reference Manual page 296

5 - 210 WiNG 5.6 Access Point System Reference Guide
3. Set the following
Certificate Name
Use Existing
Create New
4. Set the following
Certificate Subject Name
Country (C)
Figure 5-139 Certificate Management - Create Certificate screen
Create New Self-Signed Certificate
Enter the 32 character maximum name assigned to identify the name of the trustpoint
associated with the certificate. A trustpoint represents a CA/identity pair containing the
identity of the CA, CA-specific configuration parameters, and an association with an
enrolled identity certificate.
Select this option to use an existing RSA key. Use the drop-down menu to select the
existing key used by both the device and the server (or repository) of the target RSA key.
Select this option to create a new RSA key. Provide a 32 character name to identify the
RSA key. Use the spinner control to set the size of the key (from 2,048 or 4,096 bits).
Motorola Solutions recommends leaving this value at the default setting (2048) to ensure
optimum functionality. For more information on creating a new RSA key, see
Management on page
Certificate Subject Name
Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-configured to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Define the Country of deployment for the certificate. The field can be modified by the user.
This is a required field and must not exceed 2 characters.
configuration parameters:
5-208.
parameters required for the creation of the certificate:
RSA Key