Configuring Wireless Network Settings; Wireless - Basic - Motorola WA840GV2 User Manual

CONFIGURATION

Configuring Wireless Network Settings

The Wireless Network screens enable you to adjust settings for your
wireless connection. Refer to each subsection for further
descriptions. These include:
! Basic
! Security
! Site Monitor
! Advanced

Wireless - Basic

This screen enables you to setup your Service Set Identifier (SSID)
parameters for your network. The SSID is the name of your network
that is shared among all the devices in a wireless network. The SSID
must be identical on all of the devices in your wireless network. The
SSID is case-sensitive and must not exceed 32 alphanumeric
characters.
The default SSID is motorola appended with the last three characters
of the unit's MAC address. It is recommended that you change this to
a name easy for you to remember.
To access the screen, click Wireless > Basic.
Click APPLY to save your settings or CANCEL to cancel changes.
Field or Button Description
Network Name Enter a Network Name (SSID) of no more than
(SSID) 32 alphanumeric characters. This SSID has to
be entered on every wireless device on your
wireless network. The default SSID is
"motorola" along with the last three characters
the unit's MAC address.
SECTION 3, CONFIGURATION
SECTION 3
3-3