Motorola WiNG 5.6 Reference Manual page 974

14 - 12 WiNG 5.6 Access Point System Reference Guide
DIAG PWRSPLY_FAIL 4 Power supply failure, no longer
redundant
DIAG HDD_FAILING 4 HDD is failing
DIAG UNDER_VOLTAGE 4 Voltage [str]V under low limit
[str]V
DIAG OVER_VOLTAGE 4 Voltage [str]V over high limit
[str]V
DIAG LOW_TEMP 6 Temp sensor [str] [str]C under low
limit [str]C
DIAG HIGH_TEMP 4 Temp sensor [str] [str]C over high
limit [str]C
DIAG OVER_TEMP 0 Temp sensor [str] [str]C over
maximum limit [str]C Shutdown switch
DIAG WD_STATE_CHANGE 6 Watchdog is now [str]
DOT1X DOT1X_SUCCESS 6 Client [qstr] 802.1x/EAP
authentication success on interface [qstr]//802.1x
authentication successful
DOT1X DOT1X_FAILED 5 Client [qstr] failed 802.1x/EAP
authentication on interface [qstr]//802.1x authentication
failure
DOT11 COUNTRY_CODE 5 Country of operation
configured to [str]
DOT11 COUNTRY_CODE_ERROR 1 Error setting country
of operation. [str]
DOT11 CLIENT_ASSOCIATED 6 Client [qstr] associated
to wlan [qstr] ssid [qstr] on radio [qstr]
DOT11 CLIENT_DISASSOCIATED 6 Client [qstr]
disassociated from wlan [qstr] radio [qstr]: [str] (reason
code:[uint])
DOT11 CLIENT_DENIED_ASSOC 5 Client [qstr] denied
association on radio [qstr] [str]: [str]
DOT11 CLIENT_ASSOC_IGNORED 6 Client [qstr]
ignored association on radio [qstr] [str]: [str]
DOT11 WPA_WPA2_SUCCESS 6 Client [qstr]
completed [str] handshake on wlan [qstr] radio [qstr]
DOT11 WPA_WPA2_FAILED 5 Client [qstr] failed [str]
handshake on wlan [qstr] radio [qstr]
DOT11 WPA_WPA2_KEY_ROTN 6 Rotating wpa/wpa2
group keys on wlan [qstr] /
Log power supply failure
Log HDD failure
Log voltage sensor under low limit
Log voltage sensor over high limit
Log temperature sensor under low limit
Log temperature sensor over high limit
Log temperature sensor over max limit
Log watchdog state
802.1X authentication successful
802.1X authentication failed
Country of operation configured
Error setting country of operation
Client associated event
Client disassociated
Client denied association
Client ignored association
Client completed WPA/WPA2 handshake
Client failed WPA/WPA2 handshake
Rotating WPA/WPA2 group keys on WLAN