Motorola WiNG 5.6 Reference Manual page 646

8 - 32 WiNG 5.6 Access Point System Reference Guide
Precedence
VLAN ID
Traffic Class
Match 802.1P
Ethertype
Description
8. Select + Add Row
required to remove selected MAC Firewall Rules.
9. Select OK when completed to update the MAC Firewall Rules. Select
Use the spinner control to specify a precedence for this MAC firewall rule from 1 - 5000.
Rules with lower precedence are always applied first to packets.
Enter a VLAN ID representative of the shared SSID each user employs to interoperate
within the network (once authenticated by the RADIUS server). The VLAN ID can be from
1 - 4094.
Select the option to enable filtering using Traffic Class. Use the spinner control to specify
a traffic class. Traffic class can be from 1 - 10.
Configures IP DSCP to 802.1p priority mapping for untagged frames. Use the spinner
control to define a setting from 0 - 7.
Use the drop-down menu to specify an Ethertype of either other, ipv4, arp, rarp, appletalk,
aarp, mint, wisp,ipx, 802.1q and ipv6. An Ethertype is a two-octet field within an Ethernet
frame. It is used to indicate which protocol is encapsulated in the payload of an Ethernet
frame.
Provide a description (up to 64 characters) for the rule to help differentiate the it from
others with similar configurations.
as needed to add additional MAC Firewall Rule configurations. Select the - Delete Row
Reset to revert to the last saved configuration.
icon as