Motorola WiNG 5.6 Reference Manual page 195

6. If adding a new Bridge VLAN configuration, use the spinner control to define a
defined and saved before the
7. If creating a new Bridge VLAN, provide a
help differentiate it from other VLANs with similar configurations.
8. Firewalls, generally, are configured for all interfaces on a device. When configured, firewalls generate flow tables that
store information on the traffic allowed to traverse through the firewall. These flow tables occupy a large portion of the
limited memory that could be used for other critical purposes. With the per VLAN firewall feature enabled on an interface,
flow tables are only generated for that interface. Flow tables are not generated for those interfaces where this feature is
not enabled. This frees up memory which can be used for other purposes.
Firewalls can be switched off for those interfaces which are known to carry trusted traffic and only enabled on the
interfaces that can provide a vector for an attack on the network. Select the
on this interface.
Figure 5-69 Network - Bridge VLAN Configuration screen
General tab can become enabled and the remainder of the settings defined.
Description (up to 64 characters) unique to the VLAN's specific configuration to
Device Configuration 5 - 109
VLAN ID from 1 - 4095. This value must be
Per VLAN Firewall option to enable firewall