Motorola WiNG 5.6 Reference Manual page 623

9. Select + Add Row as needed to add additional Storm Control configurations for other traffic types or interfaces. Select the
Delete icon as required to remove selected rows.
10. Refer to the Storm Control Logging
Traffic Type
Logging
11. Select + Add Row as needed to add additional Storm Control log entries for other interfaces. Select the
required to remove selected rows.
12. Select OK to update the Storm Control settings. Select
can be invoked at any point in the configuration process by selecting
side, of the access point user interface.
13. Select the Advanced Settings
Use the Advanced Settings
configuration and TCP protocol checks.
14. Refer to the Firewall Status
default.
If disabling the firewall, a confirmation prompt displays stating NAT, wireless hotspot, proxy ARP,
deny-static-wireless-client and deny-wireless-client sending not permitted traffic excessively will be disabled.
field to define how storm events are logged.
Use the drop-down menu to define the traffic type for which the Storm Control logging
configuration applies. Options include ARP, Broadcast, Multicast and Unicast.
Select the check box to activate the spinner control used to specify the standard log level
used if a Storm Control attack is detected. The default log level is Warning.
tab.
tab to enable/disable the firewall, define application layer gateway settings, flow timeout
Figure 8-3 Wireless Firewall screen - Advanced Settings tab
radio buttons to define the firewall as either Enabled or Disabled. The firewall is enabled by
Reset to revert to the last saved configuration.The firewall policy
Activate Firewall Policy
Security Configuration
Delete icon as
from the upper, left-hand
8 - 9