PMP 320 Administration and Configuration Guide
Before you begin
The CNUT tool must be installed at the operations center on a PC. The latest AP and Canopy
Network Updater Tool software can be accessed at
http://motorola.wirelessbroadbandsupport.com/software/
unless an update is available. Also located at this link is the Network Updater Tool Online help
document. Refer to this document for additional information about any CNUT tool usage
questions.
Adding the AP network element to the Network Root hierarchy
Use the following procedure to add the devices using the CNUT tool.
Procedure 2-3 Accessing the CNUT updater and add the network devices
1
2
MAR 2010
Be sure that Passive FTP is disabled on the Update > Configure menu before
beginning these procedures.
On the PC desktop go to Start > Programs > Canopy > Network Updater 3.2 >
Network Updater
In the Canopy Network Updater menu select:
Edit > Add Element to Network Root
or select
Edit > Add Elements to Highlighted Element
Check the AP Software Version
Use CNUT 3.20.11 for this release,
2-3