Motorola WiNG 5.6 Reference Manual page 395

Figure 5-203 Device Overrides - Add Network Bridge VLAN screen
8. If adding a new bridge VLAN configuration, use the spinner control to define or override a VLAN ID from 1 - 4094. This value
must be defined and saved before the General tab can become enabled and the remainder of the settings defined.
9. If creating a new Bridge VLAN, provide a Description (up to 64 characters) unique to the VLAN's specific configuration to
help differentiate it from other VLANs with similar configurations.
10. Select the Per VLAN Firewall
interfaces on a device. When configured, firewalls generate a large amount of flow tables that store information on the
traffic allowed to traverse through the firewall. These flow tables occupy a large portion of the limited memory on the
device that could be used for other critical purposes. With the Per VLAN firewall feature enabled on an interface, flow
tables are only generated for that interface, Flow tables are not generated for those interfaces where this feature is not
enabled. This frees up memory that can be used for other purposes.
Firewall can be switched off for those interfaces which are known to carry trusted traffic and only enabled on the interfaces
that can provide a vector for an attack on the network.
option to enable firewall on this interface. Firewalls, generally, are configured for all
Device Configuration 5 - 309