Motorola WiNG 5.6 Reference Manual page 972

14 - 10 WiNG 5.6 Access Point System Reference Guide
DHCPSVR DHCPSVR_STOP 6 DHCP server is stopped
DIAG WD_RESET_SYS 2 The system has been RESET
by the Watchdog
DIAG CPU_USAGE_TOO_HIGH 4 CPU Usage too high.
Limit of [int]*(0.1%) exceeded. Current CPU usage is
[int]*(0.1%)
DIAG CPU_USAGE_TOO_HIGH_RECOVER 4 CPU Usage
too high recover. Limit is [int]*(0.1%)
DIAG CPU_LOAD 4 [str] minute average load limit
exceeded, value is [str]% limit is [str]% (top processes:
[str])
DIAG RAM_USAGE 6 [str], pid [uint], has exceeded ram
usage limit [uint].[uint]%, now using [uint].[uint]%
DIAG MEM_USAGE_TOO_HIGH 6 Memory Usage too
high. Current Usage is [int]*(0.1%). Memory Usage
Threshold is [int]*(0.1%)
DIAG MEM_USAGE_TOO_HIGH_RECOVER 6 Memory
Usage too high recover. Current Usage is [int]*(0.1%).
Memory Usage Threshold is [int]*(0.1%)
DIAG BUF_USAGE 6 [uint] byte buffer usage greater
than expected, [uint] used, warning level [uint]
DIAG HEAD_CACHE_USAGE 6 socket buffer head
cache usage is greater than expected, usage [uint],
warning level [uint]
DIAG IP_DEST_USAGE 6 IP destination cache usage is
greater than expected, usage [uint], warning level [uint]
DIAG FREE_RAM 6 Free RAM, [str]% is less than limit
[str]%. Top Memory process: [str]/[uint] using
[uint].[uint]% , [str]/[uint] using [uint].[uint]% , [str]/[uint]
using [uint].[uint]%
DIAG FREE_FLASH_DISK 4 Free [str] file system space,
[str]% is less than limit [str]%
DIAG DISK_USAGE 4 Disk usage too high
DIAG NEW_LED_STATE 6 LED state message [str] from
module [str]
DIAG FREE_FLASH_INODES 4 [uint] Free INodes on [str]
file system is less than limit [uint]
DIAG FREE_NVRAM_DISK 4 Free [str] file system
space, [str]% is less than limit [str]%
DHCP server stopped
Log watchdog reset
Log CPU load detected as too high
Current CPU usage is too high
CPU average load limit exceeded
Log processor RAM usage has exceeded RAM limit
Memory usage too high
Memory usage detected as too high
Log buffer usage greater than anticipated
Log head cache usage greater than anticipated
Log destination cache usage greater than anticipated
Log RAM space less than limit
Log free disk space less than limit
Log disk usage too high
Log LED message from module
Log INodes less than system limit
Log file system space less than limit