Motorola WiNG 5.6 Reference Manual page 979

NSM IF_FAILOVER 5 Interface [str] failover to Interface
[str]
NSM IF_FAILBACK 5 Interface [str] failback to Interface
[str]
PM PROCSTART 6 Starting process [str]
PM PROCRSTRT 3 Process str]"is not responding.
Restarting process
PM PROCMAXRSTRT 1 Process [str] reached its
maximum number of allowed restarts
PM PROCSYSRSTRT 0 Process [str] reached its
maximum number of allowed restarts. Rebooting the
system.
PM PROCSTOP 5 Process [str] has been stopped
PM PROCID 5 Process [str] changed its PID from [int] to
[int]
PM STARTUPCOMPLETE 5 System startup complete
PM PROCNORESP 4 Process [str] is not responding
([uint]/[uint])
RADCONF RADIUSDSTART 6 Radius Server Started
RADCONF RADIUSDSTOP 6 Radius Server Stopped
RADCONF COULD_NOT_STOP_RADIUSD 3 radiusd
could not be stopped
RADIO RADIO_STATE_CHANGE 5 Radio [qstr] changing
state from [qstr] to [qstr]
RADIO RADAR_SCAN_STARTED 6 Radar scan on
primary channel [uint] freq [uint] MHz for a duration
[uint] secs on radio [qstr]
RADIO RADAR_SCAN_COMPLETED 6 Radar scan done
on primary channel [uint] freq [uint] MHz on radio [qstr]
RADIO RADAR_DETECTED 4 Radar found on channel
[uint] freq [uint] MHz
RADIO RADAR_DET_INFO 4 Radar info: Radio: [qstr].
New channel: [uint] freq [uint] MHz. Scan time: [uint]
secs
RADIO RESUME_HOME_CHANNEL 6 Operation on
home channel [uint] freq [uint] MHz resumes on radio
[qstr] after earlier radar detect
Interface failover
Interface failback
Process started
Process restarted
Process reached max number of restarts
Process reached max restarts. Rebooting system.
Process has been stopped
Process changed PID
System startup completed
Process is not responding
RADIUS server started
RADIUS server stopped
RADIUS server failed to stop
Radio state changed
Radar scan started
Radar scan completed
Radar detected
Radar info
Radio resuming on home channel
WiNG Events 14 - 17