Motorola WiNG 5.6 Reference Manual page 211

Figure 5-79 Network - Alias - Network Service Alias Add screen
7. If adding a new Network Service
NOTE: The Network Service Alias Name
8. Within the Range field, use the
range or double-click on an existing service alias range entry to edit it.
Protocol
Source Port
(Low and High)
Destination Port
(Low and High)
9. Select OK when completed to update the network service alias rules. Select
saved configuration.
Alias, provide it a name up to 32 characters.
+ Add Row button to specify the
Specify the protocol for which the alias has to be created. Use the drop-down to select the
protocol from eigrp, gre, icmp, igmp, ip, vrrp, igp, ospf, tcp and udp. Select other if the protocol
is not listed. When a protocol is selected, its protocol number is automatically selected.
Note: Use this field only if the protocol is tcp or udp.
Specify the source ports for this protocol entry. A range of ports can be specified. Select the
Enter Range button next to the field to enter a lower and higher port range value. Up to eight
(8) such ranges can be specified.
Note: Use this field only if the protocol is tcp or udp.
Specify the destination ports for this protocol entry. A range of ports can be specified. Select
the Enter Range button next to the field to enter a lower and higher port range value. Up to eight
(8) such ranges can be specified.
always starts with a dollar sign ($).
Start IP address and
Reset to revert the screen back to its last
Device Configuration 5 - 125
End IP address for the service alias