Motorola WiNG 5.6 Reference Manual page 546

6 - 80 WiNG 5.6 Access Point System Reference Guide
NOTE: The monitoring and scanning parameters within the Scanning Configuration
screen are only enabled when Custom is selected as the Sensitivity setting from the
Basic Configuration screen.
15. Enable or disable
When enabled, detector radios monitor their coverage areas for potential failed peers or coverage area holes requiring
transmission adjustments for coverage compensation.
16. Select this option and specify a threshold number between 10 and 10,000. When this threshold is reached, awareness
settings will be overridden with the values specified.
17. Select an index value from 1-3 for awareness overrides. The overrides are executed based on index as defined in the table,
with the lowest index being executed first.
Day
Start Time
Figure 6-34 SMART RF - Scanning Configuration screen
Smart Monitoring Enable
Use the drop-down menu to select a day of the week to apply the override. Selecting All
will apply the policy every day. Selecting weekends will apply the policy on Saturdays and
Sundays only. Selecting weekdays will apply the policy on Monday, Tuesday, Wednesday,
Thursday and Friday. Selecting individual days of the week will apply the policy only on
the selected day.
This value sets the starting time of day(s) that the overrides will be activated. Use the
spinner controls to select the hour and minute, in 12h time format. Then use the radio
button to choose AM or PM.
by selecting the option. The feature is enabled by default.