Motorola WiNG 5.6 Reference Manual page 561

6. Configure the following parameters in respect to the intended
to associated access point radios and their associated neighbor:
Mesh Tx Rate Limit
Rate
Figure 6-44 Mesh QoS Policy - Rate Limit screen
Select this option to enable rate limiting for all data received from any mesh point in the
mesh. This feature is disabled by default.
Define a receive rate limit from 50 - 1,000,000 kbps. This limit constitutes a threshold for
the maximum the number of packets transmitted or received over the mesh point (from all
access categories). Traffic that exceeds the defined rate is dropped and a log message is
generated. The default setting is 5000 kbps.
Wireless Configuration 6 - 95
From Air Upstream Rate Limit, or traffic from the controller