Motorola WiNG 5.6 Reference Manual page 227

38. Refer to the following fields to define
Shutdown
Transform Set
39. Refer to the following fields to define the Remote VPN Client
IKEV2 Peer
Priority
40. Set the following DHCP Peer Authentication
Auth Type
Key
41. Set the following DHCP Peer Localid
Type
Figure 5-90 Profile Security - Remote VPN Client tab
Remote VPN Client Configuration
Select this option to disable the remote VPN client. The default is disabled.
Configure the transform set used to specify how traffic is protected within the crypto ACL
defining the traffic that needs to be protected. Select the appropriate traffic set from the
drop-down menu or click the icon next to the drop-down menu to create a new transform
set.
Use the drop-down menu to select the remote IKE v2 peer. Use the icon next to the drop-
down to create a new peer.
Use the spinner to set the priority in which a remote peer is connected. The lower the
number the higher the priority.
settings:
Use the drop-down menu to specify the DHCP peer authentication type. Options include PSK
and rsa. The default setting is rsa.
Provide a 8 - 21 character shared key password for DHCP peer authentication.
settings:
Select the DHCP peer local ID type. Options include string and autogen-uniqueid. The
default setting is string.
Device Configuration 5 - 141
settings:
Peer list: