Motorola WiNG 5.6 Reference Manual page 801

Figure 12-66 Certificate Management - Create Certificate screen
4. Define the following configuration parameters required to
Certificate Name
RSA Key: Create New
RSA Key: Use Existing
5. Set the following Certificate Subject Name
Certificate Subject
Name
Country (C)
Create New Self-Signed
Enter the 32 character maximum name assigned to identify the name of the trustpoint
associated with the certificate. A trustpoint represents a CA/identity pair containing the
identity of the CA, CA-specific configuration parameters, and an association with an
enrolled identity certificate.
To create a new RSA key, select the radio button to define 32 character name used to
identify the RSA key. Use the spinner control to set the size of the key (between 1,024 -
2,048 bits). Motorola Solutions recommends leaving this value at the default setting of
1024 to ensure optimum functionality. For more information on creating a new RSA key,
see RSA Key Management on page
Select the radio button and use the drop-down menu to select the existing key used by
both the access point and the server (or repository) of the target RSA key.
parameters required for the creation of the certificate:
Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-configured to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Define the Country used in the certificate. This is a required field and must not exceed a
2 character country code.
Certificate:
12-55.
Operations 12 - 61