Motorola WiNG 5.6 Reference Manual page 649

Air Termination
Air Termination Channel
Switch
Air Termination Mode
8. Refer to the Device Categorization
Select the Add icon to create a new Device Categorization policy, or select the
Categorization policy.
9. Select OK to update the settings. Select
at any point in the configuration process by selecting
access point user interface.
10. Select the WIPS Events
configuration parameters. This option need to remain selected to apply the WIPS configuration to the access point profile.
The Excessive tab displays by default, with additional
Select this option to enable the termination of detected rogue AP devices. Air termination
lets you terminate the connection between your wireless LAN and any access point or
client associated with it. If the device is an access point, all clients dis-associated with
the access point. If the device is a client, its connection with the access point is
terminated. This setting is disabled by default.
Select this option to allow neighboring access point to switch channels for rogue AP
termination. This setting is disabled by default.
If termination is enabled, use the drop-down menu to specify the termination mode used
on detected rogue devices. The default setting is manual.
field to associate a Device Categorization Policy with this Wireless IPS policy.
Reset to revert to the last saved configuration. The WIPS policy can be invoked
Activate Wireless IPS Policy
tab. Ensure the Activate Wireless IPS Policy
Edit
option remains selected to enable the screen's
MU Anomaly and AP Anomaly
Security Configuration 8 - 35
icon to modify an existing Device
from the upper, left-hand side, of the
tabs also available.