Motorola WiNG 5.6 Reference Manual page 363

Encapsulation
UDP Port
Source VLAN
Native VLAN
27. Select the + Add Row
Cookie Size
Value 1
Value 2
End Point
28. Select OK to save the changes and overrides to the session configuration. Select
configuration.
5.4.5.4.4 Overriding IGMP Snooping Configuration
Overriding the Network Configuration
Internet Group Management Protocol (IGMP) is a protocol to establish and maintain multicast group memberships to interested
members. Multicasting allows a computer on a network to send content to multiple computers who have registered to receive
the content. IGMP Snooping is the term for listening to IGMP traffic between an IGMP host and routers in the network to
maintain a map of the links that require multicast streams. Multicast traffic is filtered out for those links which do not require
them.
To configure IGMP Snooping:
1. Select the Configuration
2. Select Device Overrides
3. Select a target device from the device browser in the lower, left-hand, side of the UI.
4. Select Network
5. Select IGMP
Select either IP or UDP as the peer encapsulation protocol. The default setting is IP. UDP
uses a simple transmission model without implicit handshakes.
If UDP encapsulation is selected, use the spinner control to define the UDP encapsulation
port. This is the port where the L2TP service is running.
Define the VLAN range (1 - 4,094) to include in the tunnel. Tunnel session data includes
VLAN tagged frames.
Select this option to define the native VLAN that will not be tagged
button to set the following:
Set the size of the cookie field within each L2TP data packet. Options include 0, 4 and 8.
The default setting is 0.
Set the cookie value first word.
Set the cookie value second word.
Define whether the tunnel end point is local or remote.
tab from the Web UI.
from the Device menu to expand it into sub menu options.
to expand its sub menu options.
Snooping.
Device Configuration 5 - 277
Reset to revert to the last saved