Motorola WiNG 5.6 Reference Manual page 383

31. Use the drop-down menu to define the
protocol.
32. Select OK to save the changes to the basic configuration. Select
33. Select the IPv4 tab to set IPv4 settings for this virtual interface.
IPv4 is a connection less protocol. It operates on a best effort delivery model that does not guarantee delivery or assures
proper sequencing or avoidance of duplicate delivery (unlike TCP).
Figure 5-192 Device Overrides - Network - OSPF Virtual Interfaces - Basic Configuration screen - IPv4 tab
34. Set the following network information from within the
Enable Zero
Configuration
Primary IP Address
Use DHCP to Obtain IP
Use DHCP to obtain
Gateway/DNS
Servers
Secondary Addresses
35. Select OK to save the changes to the IPv4 configuration. Select
36. Select the IPv6 tab to set IPv6 settings for this virtual interface.
Bonjour Gateway Discovery
IPv4 Addresses
Zero configuration can be a means of providing a primary or secondary IP addresses for the
virtual interface. Zero configuration (or zero config) is a wireless connection utility included
with Microsoft Windows XP and later as a service dynamically selecting a network to connect
based on a user's preferences and various default settings. Zero config can be used instead
of a wireless network utility from the manufacturer of a computer's wireless networking
device. This value is set to None by default.
Define the IP address for the VLAN associated Virtual Interface.
Select this option to allow DHCP to provide the IP address for the Virtual Interface. Selecting
this option disables the Primary IP address field.
Select this option to allow DHCP to obtain a default gateway address and DNS resource for
one virtual interface. This setting is disabled by default and only available when the Use
DHCP to Obtain IP option is selected.
Use the Secondary Addresses parameter to define additional IP addresses to associate with
VLAN IDs. The address provided in this field is used if the primary IP address is unreachable.
Device Configuration 5 - 297
Policy. Bonjour is Apple's service discovery
Reset to revert to the last saved configuration.
field:
Reset to revert to the last saved configuration.