Motorola WiNG 5.6 Reference Manual page 599

Request Timeout
Retry Timeout Factor
14. Select OK to save the changes,
15. Select the Settings tab.
Specify the time for the re-transmission of request packets after an unsuccessful attempt.
The default is 3 seconds. If the set time is exceeded, the authentication session is
terminated.
Set the scaling of retransmission attempts from 50 - 200 seconds. The timeout at each
attempt is the function of the retry timeout factor and the attempt number. 100 (the default
value) implies a constant timeout on each retry. Smaller values indicate more aggressive
(shorter) timeouts. Larger numbers define more conservative (larger) timeouts on each
successive attempt. The default is 100.
Reset to revert to the last saved configuration or
Figure 7-18 AAA TACACS - Settings screen
Network Configuration 7 - 31
Exit to close the screen.