Motorola WiNG 5.6 Reference Manual page 533

12. Select the Enable admission control for firewall detected traffic (e.g, SIP)
traffic detected by the access point's firewall. This feature is enabled by default.
13. Select the Implicit TPSEC
they can transmit or receive data. This feature is enabled by default.
14. Set the following Voice Access
Enable Voice
Maximum Airtime
Maximum Wireless
Clients
Maximum Roamed
Wireless Clients
Figure 6-28 Radio QoS Policy screen - Admission Control tab
option to require wireless clients to send their traffic specifications to the access point before
admission control settings for the radio QoS policy:
Select this option to enable admission control for voice traffic. Only voice traffic admission
control is enabled, not any of the other access categories (each access category must be
separately enabled and configured). This feature is disabled by default.
Set the maximum airtime (in the form of a percentage of the radio's bandwidth) allotted
to admission control for voice supported client traffic. The available percentage range is
from 0 - 150%, with 150% being available to account for over-subscription. This value
ensures the radio's bandwidth is available for high bandwidth voice traffic (if anticipated
on the wireless medium) or other access category traffic if voice support is not prioritized.
Voice traffic requires longer radio airtime to process, so set a longer airtime value if the
radio is intended to support voice. The default is 75%.
Set the number of voice supported wireless clients allowed to exist (and consume
bandwidth) within the radio's QoS policy. Select from an available range of 0 - 256 clients.
Consider setting this value proportionally to the number of other QoS policies supporting
the voice access category, as wireless clients supporting voice use a greater proportion of
resources than lower bandwidth traffic (like low and best effort categories). The default
is 100.
Set the number of voice supported wireless clients allowed to roam to a different access
point radio. Select from 0 - 256 clients. The default value is 10.
Wireless Configuration 6 - 67
option to apply radio QoS settings to