Motorola WiNG 5.6 Reference Manual page 707

The RADIUS Server Policy
4. Select the Activate RADIUS Server Policy
this option remains selected, or this RADIUS server configuration is not applied to the access point profile.
5. Define the following Settings
RADIUS User Pools
LDAP Server Dead Period
LDAP Groups
LDAP Group Verification
LDAP Chase Referral
Figure 9-29 RADIUS Server Policy screen - Server Policy tab
screen displays with the
button to enable the parameters within the screen for configuration. Ensure
required in the creation or modification of the server policy:
Select the user pools to apply to this server policy. Up to 32 can be applied. If a
pool requires creation, select the Create link. For more information, see
User Pools on page
Set an interval in either Seconds (0 - 600) or Minutes (0- 10) during which the
access point will not contact its LDAP server resource. A dead period is only
implemented when additional LDAP servers are configured and available.
Use the drop-down menu to select LDAP groups to apply the server policy
configuration. Select the Create or Edit icons as needed to either create a new
group or modify an existing group. Use the arrow icons to add and remove groups
as required.
Select the check box to set the LDAP group search configuration. This setting is
enabled by default.
Select the check box to set the LDAP referral chase feature. This settings is
enabled by default. When enabled, if the LDAP server does not contain the
requested information, it indicates to the LDAP client that it does not have the
requested information and provides the client with another LDAP server that
could have the requested information. It is up to the client to contact the other
LDAP server for its information.
Server Policy tab displayed by default.
9-43.
Services Configuration 9 - 47
Defining