Overriding A Management Configuration - Motorola WiNG 5 System Reference Manual

5 - 274 WiNG 5 Access Point System Reference Guide
login page where the user must enter valid credentials to access to the network. Once logged into the hotspot,
additional Agreement, Welcome and Fail pages provide the administrator with a number of options on the
hotspot's screen flow and user appearance.
Either select an existing captive portal policy, use the default captive portal policy or select the Create link to
create a new captive portal configuration that can be applied to a profile. For more information, see
Captive Portal Policies on page
6. Select OK
the last saved configuration.

5.10.5 Overriding a Management Configuration

There are mechanisms to allow/deny management access to the network for separate interfaces and protocols (HTTP,
HTTPS, Telnet, SSH or SNMP). These management access configurations can be applied strategically to profiles as
resource permissions dictate for the profile. Additionally, overrides can be applied to customize a device's
management configuration, if deployment requirements change and a devices configuration must be modified from
its original device profile configuration.
Additionally, an administrator can define a profile with unique configuration file and device firmware upgrade
support.
To define or override a profile's management configuration:
1. Select Devices
2. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides
4. Select Management.
9-2.
to save the changes or overrides made to the profile's services configuration. Select
from the Configuration tab.
from the Device menu to expand it into sub menu options.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
Configuring
Reset to revert to