Automatic Print Head Check For Broken Dots At Power On Setting (Auto Hd Chk); Print Head Check For Broken Dots After Cover Close Setting (Head Check) - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)

4.4.12 Automatic Print Head Check for Broken Dots At Power On Setting (AUTO HD CHK)

This setting selects whether or not an automatic print head check for broken dots is to be automatically
performed when the power is turned on.
AUTO HD CHK OFF
[FEED]
[PAUSE]
AUTO HD CHK ON
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after setting,
then stored in the backup memory.

4.4.13 Print Head Check For Broken Dots After Cover Close Setting (HEAD CHECK)

This setting selects whether or not a print head check for broken dots is to be performed after the cover is
closed.
HEAD CHECK OFF
[FEED]
[PAUSE]
HEAD CHECK ON
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after setting,
then stored in the backup memory.
An automatic print head check for broken dots is not performed
when the power is turned on. (Factory default)
An automatic print head check for broken dots is performed
when the power is turned on.
A print head check for broken dots is not performed after the
cover is closed. (Factory default)
A print head check for broken dots is performed after the
cover is closed.
4- 37
EO13-33005
4.4 Parametr Setting