Polaroid ID-3000 Repair Manual page 99

Polaroid ID3000 Service Manual
FREEZE_IRIS
RGB_GAIN
RGB_OFFSET
RGB_CONTRAST
LIVE_RGB_GAIN
LIVE_RGB_OFFSET
LIVE_RGB_CONTRAST
The following objects can only be set by directly editing the configuration file:
FAST_SYNC
RGB_STROBE
COMP_STROBE
SCRUNCHED
STROBE_RECHARGE
PORTRAIT_BACKGROUND_THRESHOLD
PORTRAIT_BACKGROUND_ITER
MATROX PREVIEW OUTPUT CONTROLLER CONFIGURATION FILE
File Name: MOC_ILUM.CNF
Objects:
CFR_LAYOUT_FILE
Card layout file to be drawn.
MOC_RESOLUTION
Determines the display resolution during card preview. Available options are
"640X480" (2 Mbyte board only), "1024X768" (2 Mbyte board and multiscan monitor
only), "512X480", and "512X400".
MOC_INTERLACE
Determines if the preview screen is interlaced. "Y" is interlaced, "N" is non-interlaced.
VGA monitors require "N". 1024X768 resolution requires "Y".
MOC_XSIZE
MOC_YSIZE
Determines the physical size of the card layout on the screen. The logical card
coordinates are mapped to this area. For downward compatibility with card layouts
designed for the Paris board, it is possible for these parameters to be larger than the
actual monitor resolution, since these cards are drawn with die cutter offsets built into the
card graphics commands. New card layouts should not have any die cutter offsets. They
should be drawn to the edges of the logical coordinate space.
Troubleshooting/Diagnostics
COMP_SATURATION
COMP_HUE
LIVE_COMP_GAIN
LIVE_COMP_OFFSET
LIVE_COMP_CONTRAST
LIVE_COMP_SATURATION
LIVE_COMP_HUE
FACE_BRIGHT
FACE_BRIGHT_VALUE
FACE_BRIGHT_OFFSET
AOI_XMIN
AOI_XMAX
AOI_YMIN
AOI_YMAX
Type: string
Type: string
Type: string
Type: string numeric
3-17