Reinstating The Cps Account (Login) - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual
Appendix 8: Reinstating the CPS Account (LOGIN)
This procedure may be used whenever:
a. The CPS account has been deleted.
b. The CPS password has been changed and forgotten.
c. The CPS key has been removed from the CPS account.
d. All user accounts have been either disabled or deleted.
Materials required:
DOS 5.0 bootable diskette (setup #1 or Startup diskette)
Installation diskette
Procedure:
Insert the DOS diskette into the A: drive. Turn the system on (if it is already on, cycle the
Power Switch).
If you are booting with the DOS 5.0 Setup #1 disk, press F3 at the Welcome to Setup screen
to exit, and press Y to confirm. You should be at the A:\> prompt.
At the A:\> prompt, Type C: and press <Enter>.
Insert the Installation disk into the A:\ drive. At the C:\> prompt, type A:PASSWORD and
press <Enter>.
The system will copy the CPS account into any existing password file, or create a new file
containing the CPS account if it does not exist.
When this completes, the system will display a message to remove the Installation disk from
the A: drive and reboot the system. Doing so will bring up the menu and allow logins by CPS
and by any other users who had access to the system after the last time Setup User Access
was run.
A-14
Appendix