Polaroid ID-3000 Repair Manual page 183

Polaroid ID3000 Service Manual
6. To end dark current adjust, press <F1). Program defaults to AUTOLUMA.
7. Install the Photometer, turn it on and set it to 0 - 20 f-l.
8. Adjust the brightness to 6.0 f-l on the photometer (or 3.0mV), using Luma Adjust
pot R46 (Figure 4-3).
9. Adjust the VR1 pot on the Logic Board (Figure 4-6) until the Gentest Autoluma on
the screen reads 200.
10. Press <Esc> to return to the previous menu.
4-11
Calibration Procedures