Polaroid ID-3000 Repair Manual page 27

Polaroid ID3000 Service Manual
Unpacking and assembling the system
1. Carefully unpack all system components (computer, keyboard, monitor and swivel base,
portrait camera, strobe, thermal printer & power supply assembly (3000T system) or color
film recorder & power supply assembly (3000F system), signature scanner (optional), color
scanner (optional), power outlet strip, die cutter and laminator), and place them as shown in
Figure 2-2 or some comparable arrangement.
NOTE: Figure 2-2 shows an optimal ID-3000 system arrangement.
Yours may be different.
NOTE: Computer may be placed on its side, if space is limited.
I
Figure 2-2 Optimal ID-3000 system setup
2-5
System Installation